您现在的位置:首页 >新闻动态 >> 水性固化剂特性
[来源:www.yuniguhua.com] [作者:淤泥固化] [日期:19-09-16]

水性固化剂特性
Characteristics of Water-borne Curing Agent
坚 硬:经混凝土渗透密封水性固化剂处理后的地面,莫氏硬度将达到9,莫氏硬度
Hardness: After treated with concrete permeable sealant and water-borne curing agent, Mohs hardness will reach 9, Mohs hardness will reach 9.
提高45.3%;
Increase by 45.3%;
耐 磨:混凝土渗透密封水性固化剂能够将混凝土中的各种成分固化成一个坚硬的实体
Wear resistance: Water-borne curing agent for concrete permeability seal can solidify various components of concrete into a rigid entity.
增加硬度和密实度,经使用的地面熟化后,耐磨度将提高到8倍以上;
With the increase of hardness and compactness, the wear resistance will be increased to more than 8 times after the ground is ripened.
防 尘:混凝土渗透密封水性固化剂与混凝土中的硅酸盐发生化学反应,在混凝土表面
Dust-proof: The concrete permeable sealant water-borne curing agent reacts with the silicate in the concrete to form a chemical reaction on the concrete surface.
形成一个无尘、致密的整体,永久控制了混凝土灰尘从表面空隙中析出。
Form a dust-free, compact whole, permanent control of concrete dust precipitation from surface voids.
防 滑:一般的混凝土地面,盐碱成份会从表面析出,导致打滑。但地面则不同,它在
Slip-proof: On ordinary concrete floors, saline-alkali components will precipitate from the surface, leading to slippage. But the ground is different. It's on the ground.
混凝土表面形成一个坚固、致密的整体,盐碱成份不会从表面析出。
Concrete surface forms a solid, compact whole, saline and alkali components will not precipitate from the surface.
抗 压:抗压强度经处理试样比未处理试样增强27.3%,抗折强度提高3倍以上。
Compressive strength: Compressive strength of treated specimens is 27.3% higher than that of untreated specimens, and flexural strength is more than three times higher.

版权所有 @ 天津市三川恒泰科技有限公司  www.yuniguhua.com 技术知识 技术支持:保定网络公司

热线咨询:400-007-8516  手机:13902056721/18903125401/18903321237 含:广东、福建、浙江、上海、雄安、天津及全国!

推荐:淤泥固化、河道治理、河道治理工程、河道治理施工、淤泥固化处理、吹填土地基处理、淤泥固化剂、淤泥固化设备、淤泥搅拌头设备、软土路基处理等

保定网站建设及优化保定遨游网络公司